Step-by-Step Guide on How to Service Your Air Staple Gun
- Firstly, ensure you have a clean, dry air and correct air pressure
Too high air pressure will cause the damper to break up. Too low air pressure will not allow the driver of the tool to return.
- Oil your tool through the quick release connector at the back. Just one or two drops is fine.
This will allow lubricant air mixture to flow around the tool
- Take off the head cap to access the cylinder, driver assembly and rubber damper
You may need to tap the tool on a piece of wood to get the parts out.
- Inspect parts for damage and clean debris and dirt
- Remove the magazine and check the spring tension on the magazine assembly and feed shoe.
Watch the video for full instructions!
Hope this casts some light on how to look after your air stapler.
Below is the link where you can purchase Draper Air Tool Oil which is the one we recommend. Available via our Amazon Affiliate Scheme where we make a very small commission:
Draper Airtool Oil
All the well known and reputable brand staplers are listed on our website as below:
Fine wire staple gun
Narrow Crown Stapler
Heavy duty and wide crown stapler
Carton closer
Hand Stapler
Stapling Pliers
Electric Staplers
Why not Learn 3 ways of making your air tool last longer, with this Download completely FREE on us 😊
or sign up to our Newsletter Here
Take Care,
